An application of Special Ordered Sets to a periodic milk collection problem

We present an OR-based approach to support a milk collection problem in a special branch of dairy industry. The annual growth of the sector and the continuous imbalance between milk supply and demand, has urged the sector to look for a different approach to their daily milk collection problem. Specific details of the problem environment (i.e., the continuous production on supply level and the delivery conditions on demand level) gave rise to choose for a short- to medium-term planning approach. The proposed decision support system has to be considered as an efficient tool for generating stable milk collection plans which in turn also serves as an effective starting point for the vehicle routing problem. From a computational point of view it turned out that the application of Special Ordered Sets type 1 (SOS1) was very useful. Although it appears from literature that the computational advantage of SOS1 is restricted to supplementary model conditions, this study shows that these conditions are not necessarily needed.     

悬臂梁集中载荷大挠度弯曲变形的一种解

利用数值积分法求解了细长杆悬臂梁受集中载荷时大挠度弯曲问题，并分别对无限长及有限长细杆悬臂梁进行了讨论，提出细长杆悬臂梁所受最大弯矩计算方法，为梁的强度校核提供了依据     

集货送货一体化的物流配送车辆路线问题的标号算法

本文结合实际情况,对具有时间窗约束的集货送货一体化的车辆路线问题进行了研究,针对该问题的特点,采用修正的多属性标号算法对该问题进行求解,并通过C 编程语言实现了该算法,最后用一个示例表明本文的算法是有效的.     

车辆路径问题的混合优化算法

讨论了一类车辆路径调度问题(VRP)及其数学模型，并且分析了以遗传算法求解该类问题时的染色体表示和有关遗传操作，然后结合2-opt局部优化算法提出了GA with2-opt算法来求解VRP问题，试验结果说明了该算法的有效性和可行性。     

Formulations and Valid Inequalities for the Heterogeneous Vehicle Routing Problem

We consider the vehicle routing problem where one can choose among vehicles with different costs and capacities to serve the trips. We develop six different formulations: the first four based on Miller-Tucker-Zemlin constraints and the last two based on flows. We compare the linear programming bounds of these formulations. We derive valid inequalities and lift some of the constraints to improve the lower bounds. We generalize and strengthen subtour elimination and generalized large multistar inequalities.     

固支加筋方板的大挠度塑性动力响应

本文详细分析了爆炸载荷作用下固支回筋方板的大挠度塑性动力响应，给出了各种可能的运动模拟以及相应的差别条件，导出了最大残余变形的计算式，与文献［３］的试验结果比较表明，在多数情况下符合良好。     

基于实测荷载的铁路钢桁梁桥疲劳可靠性评估

为了对钢桁梁桥疲劳进行评估,引入可靠性理论,提出了基于实测荷载的桥梁疲劳可靠性评估方法。根据某铁路钢桁梁桥实测车辆荷载数据,建立了随机车辆荷载模型。并在考虑车辆荷载随机性的基础上,结合Monte-Carlo法与有限元,分析了钢桁梁桥构件疲劳应力谱,计算了构件疲劳可靠性随时间的变化,并探讨了车辆荷载及荷载效应变异性对构件疲劳可靠性的影响,最后采用β约界法与静力分析法对钢桁梁桥系统疲劳可靠性进行了研究。结果表明,基于随机车辆荷载的构件疲劳应力谱呈现单峰分布;构件疲劳可靠性随运营时间的增加而减小;车辆荷载的增长及荷载效应变异性的增加对构件疲劳可靠性影响较大,当车辆荷载增长率和等效应力变异系数分别增加到5%时,构件疲劳寿命大幅减小;β约界法结合静力分析法可快速确定钢桁梁桥失效模式,桥梁系统疲劳寿命小于构件疲劳寿命。总的来看,基于实测荷载的钢桁梁桥疲劳可靠性评估方法能有效地利用监测数据,对桥梁疲劳评估具有良好的适用性。     

弹性抗滑桩锚固段内力计算的反力荷载法

传统的抗滑桩锚固段内力计算是将锚固段视为Winkler弹性地基梁,以幂级数解法为基础,采用地基系数“m”法或“K”法,通过查表得到桩身内力,计算过程较为繁琐,且受表中各系数的截断误差的影响,常使内力计算结果存在一些偏差。以地基系数“m(K)”法的有限差分法是一种较为理想的方法,但需通过迭代计算,且分段数较多。本文基于地基系数“m(K)”法推导了抗滑桩锚固段内力计算的反力荷载法计算公式,提出了计算精度控制方法;较之于有限差分法,本文方法无需迭代计算,具有分段数少的特点;编写了全桩内力计算和图形处理程序;计算实例表明,与传统方法相比,可有效提高抗滑桩内力分析效率和计算精度,有利于抗滑桩结构的优化设计。     

铁路货车心盘材料的耐磨性研究

对比研究了货车心盘用ZG25MnNb钢、AAR-C级钢及经过表面强化处理的锻钢20Mn、锻钢Q345和铸钢ZG25的耐磨性能；采用金相显微镜分析了材料金相结构对其耐磨性能的影响。结果表明，对货车心盘用钢材进行表面强化能够显著改善其耐磨性能ZG25MnNb钢和经表面强化处理的锻钢20Mn的耐磨性较优；表面硬度高而组织细小的材料组成的摩擦副的耐磨性较好。     

TiNi形状记忆合金变形特性实验研究

给出了一种ＴｉＮｉ形状记忆合金（多晶）的单轴拉压、循环拉伸加卸载、形状记忆效果、恢复力、相变塑性变形及拉压。扭转比例、非比例加卸载的实验结果，实验结果显示，其变形特性非常不同于普通的弹塑性材料：如Ｂａｕｓｃｈｉｎｇｅｒ效果提前，甚至于会出现于卸载阶段；低温下的残余变形会在加热后消失；恒载下冷却时产生相当大的塑性变形（相变塑性变形）且在加热时消失等等。多轴加载实验结果表明，比例加载时该材料的加载屈服面及卸载屈服面都基本满足Ｍｉｓｅｓ准则，但非比例加载时则不然。